Im keen on building a 4th or 6th bandpass box these holidays but i do not pocess the knowlage of how to do it correctly. (note the sub i want to build is not for a car but rather for my room). I dont know how to build the box to the correct specifications. SOMEONE please help!
Julz
Replies (1)
swez on 06/15/2004 13:28:56
Here's some background reading on Sealed, Ported and BP enclosures to bone up on.
http://www.bcae1.com/spboxnew2.htm
You need to know the specs of your sub(s)
and if they will be satisfactory in a BP enclosure. Some do not do well at all in BP enclosures. A very efficient design... but can sound very muddy or honky is design is wrong.
Also, consider a ported enclosure as they tend to be more natural sounding and can be tuned low enough to get some great low end bass at higher than average efficiencies.
Also, cplkittle has done a nice job on an article on BP enclosures in our FAQ. Here is the reference:
http://www.clubknowledge.com/Car_Audio_FAQ/?t17
Swez
Julz
Replies (1)
swez on 06/15/2004 13:28:56
Here's some background reading on Sealed, Ported and BP enclosures to bone up on.
http://www.bcae1.com/spboxnew2.htm
You need to know the specs of your sub(s)
and if they will be satisfactory in a BP enclosure. Some do not do well at all in BP enclosures. A very efficient design... but can sound very muddy or honky is design is wrong.
Also, consider a ported enclosure as they tend to be more natural sounding and can be tuned low enough to get some great low end bass at higher than average efficiencies.
Also, cplkittle has done a nice job on an article on BP enclosures in our FAQ. Here is the reference:
http://www.clubknowledge.com/Car_Audio_FAQ/?t17
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
