I was just wonder if anybody knows how much current my amp pulls of my charging system. The amp I have is a Rockford Fosgate Punch 201s.
Thanks,
Jay
Replies (2)
ttocs on 05/17/2004 21:36:03
there are too many factors that add into that for us to tell you. What kind of speakers, what size wire, ect..... We can give you a guestamate but it is what it is.....
swez on 05/18/2004 11:00:33
This amp uses a 20A. fuse and delivers 50x2 watts RMS @ 4 ohms stereo or 100 RMS @ 2 ohms/ch., stereo. If you bridge it, get ~200 RMS @ 4 ohms. (less current draw than most cigarette lighters) Specs recommend #10 gage power and ground for this amp.
Very modest power amp here. Good for small sub applications when bridged or use for front speakers to beef up the front stage.
Swez
Thanks,
Jay
Replies (2)
ttocs on 05/17/2004 21:36:03
there are too many factors that add into that for us to tell you. What kind of speakers, what size wire, ect..... We can give you a guestamate but it is what it is.....
swez on 05/18/2004 11:00:33
This amp uses a 20A. fuse and delivers 50x2 watts RMS @ 4 ohms stereo or 100 RMS @ 2 ohms/ch., stereo. If you bridge it, get ~200 RMS @ 4 ohms. (less current draw than most cigarette lighters) Specs recommend #10 gage power and ground for this amp.
Very modest power amp here. Good for small sub applications when bridged or use for front speakers to beef up the front stage.
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
