I've got a bazooka el-1200 and as soon as power gets to it
my main fuse blows and the amp does not power on, does anyone have any ideas on what could be causing this (internally), I've tried other amps on the same connection and they work so its gotta be the amp itself
any help is appreciated
Replies (1)
swez on 04/20/2004 17:53:54
What gage wire is used here and what is the fuse rating on the main supply feed at battery?
If you remove the power line from the amp and the fuse does not blow, the connection and feed line is good. However, when only this amp blows the main fuse, either this amp has an internal short in it somewhere or it is pulling too much current for the fuse ner the battery.
If that main fuse is 40-60 Amps (or larger)... I'd say your amp is in trouble.
Swez
my main fuse blows and the amp does not power on, does anyone have any ideas on what could be causing this (internally), I've tried other amps on the same connection and they work so its gotta be the amp itself
any help is appreciated
Replies (1)
swez on 04/20/2004 17:53:54
What gage wire is used here and what is the fuse rating on the main supply feed at battery?
If you remove the power line from the amp and the fuse does not blow, the connection and feed line is good. However, when only this amp blows the main fuse, either this amp has an internal short in it somewhere or it is pulling too much current for the fuse ner the battery.
If that main fuse is 40-60 Amps (or larger)... I'd say your amp is in trouble.
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
