Pioneer Subs

by jrodk2124
  Prev :: Next
I have two 12" 500- watts max Pioneer subs.
What size amplifier should I get for these???
model TSW34C
Thanks


Replies (2)
asplundher on 04/20/2004 19:21:53
These are rated at 150 rms (continuous) each and are pretty efficient. The max rating is for a short burst and is very insignificant towards choosing a amp. I would go with a monoblock sub amp with a rating of about 300rms at 2 ohms since they are 4 ohm subs. The JBL 300.1 would be a perfect match them and would be an inexpensive choice. Another one @ $129 (Crutchfield) is the US Acoustics USB-600D with similiar power ratings @ 2 ohms yet with a 3 year warranty. Either will be good for them.

swez on 04/20/2004 19:58:52
Good choice of amps for these subs.

Swez




Prev :: Next
Copyright ClubKnowledge 2009 * All Rights Reserved

Valid HTML 4.01 Transitional