I just picked up a 250x2 rockford fosgate amp and i am planning on using it to power my set of subs. what is the best way of bridging the amp amd making it one channel. Any help would be much appreciated.
Thanks,
Brandon
Replies (1)
swez on 03/23/2004 11:23:08
Not so fast... depends on the subs you have here.
If you have a pair of DVC 4+4 subs, can bridge the amp safetly. If not, using it as a 2 channel is your only real option. Need a 4 ohm net load for bridging a 2 channel down to mono.
What sub make and model # do you have now? A web link is great!
Swez
Thanks,
Brandon
Replies (1)
swez on 03/23/2004 11:23:08
Not so fast... depends on the subs you have here.
If you have a pair of DVC 4+4 subs, can bridge the amp safetly. If not, using it as a 2 channel is your only real option. Need a 4 ohm net load for bridging a 2 channel down to mono.
What sub make and model # do you have now? A web link is great!
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
