How yall doin?!
I got a recent offer from a friend a Lanzar Model VIBE255 1400 Watt 2 Channel MOSFET Amplifier for $100
# 2 x 350 Watts RMS at 4 Ohms
# 2 x 700 Watts Max at 4 Ohms
# 1 x 1400 Watts Max at 4 Ohms Bridged
# 2 x 550 Watts at 2 Ohms
# Electronic Crossover Network
# Bass Boost Circuit
# Bridgeable at 4 Ohms
# 2 Ohm Stereo Stable
# Tri-Mode Capable
# Gold RCA Inputs
# Power & Protection LED Indicators
# Advanced Protection Circuitry
# Soft Turn On/Off
# Dual VU Meter
# Thermometer
# Frequency Response: 15 Hz-35 kHz
# S/N Ratio: 90 dB
# Dimensions: 10.95"W x 2.3"H x 19"L
http://www.lanzar.com/itempage.asp?MODEL=VIBE255
can I get some advise on this? It seems like a pretty good deal. I don't really have the funds for a top notch JBL. So would be a good alternative?
I don't have the subwoofers picked out yet I am working on getting an amp first that way I have some limits to what to what subwoofers I can get.
Replies (2)
ttocs on 03/8/2004 11:08:33
I have not heard good things about lanzar for some time, particularly their vibe series..... I would not own one or recommend one....
swez on 03/8/2004 11:30:30
The price is fair if the amp is in good condition. Have you heard the system he has with this amp installed?
I am not a big Lanzar fan either... but if it worked OK for him and you like it, see if he'll let you borrow it for a time to try out before you buy.
From the specs noted, see about 800 - 1000 watts RMS when bridged to a 4 ohm load. Will have to use a pretty hefty single sub that is either 4 ohm SVC, or a 2+2 DVC. Not too many 4 ohm SVC's out there that can take that much power. The sub will cost much more than the amp when you are done... or use 2 DVC, (4+4) subs will works as well.
Swez
PS This amp will suck a lot of amperes from your electricals as it is a Class A/B amp. Do you know the fuse ratings used here?
I got a recent offer from a friend a Lanzar Model VIBE255 1400 Watt 2 Channel MOSFET Amplifier for $100
# 2 x 350 Watts RMS at 4 Ohms
# 2 x 700 Watts Max at 4 Ohms
# 1 x 1400 Watts Max at 4 Ohms Bridged
# 2 x 550 Watts at 2 Ohms
# Electronic Crossover Network
# Bass Boost Circuit
# Bridgeable at 4 Ohms
# 2 Ohm Stereo Stable
# Tri-Mode Capable
# Gold RCA Inputs
# Power & Protection LED Indicators
# Advanced Protection Circuitry
# Soft Turn On/Off
# Dual VU Meter
# Thermometer
# Frequency Response: 15 Hz-35 kHz
# S/N Ratio: 90 dB
# Dimensions: 10.95"W x 2.3"H x 19"L
http://www.lanzar.com/itempage.asp?MODEL=VIBE255
can I get some advise on this? It seems like a pretty good deal. I don't really have the funds for a top notch JBL. So would be a good alternative?
I don't have the subwoofers picked out yet I am working on getting an amp first that way I have some limits to what to what subwoofers I can get.
Replies (2)
ttocs on 03/8/2004 11:08:33
I have not heard good things about lanzar for some time, particularly their vibe series..... I would not own one or recommend one....
swez on 03/8/2004 11:30:30
The price is fair if the amp is in good condition. Have you heard the system he has with this amp installed?
I am not a big Lanzar fan either... but if it worked OK for him and you like it, see if he'll let you borrow it for a time to try out before you buy.
From the specs noted, see about 800 - 1000 watts RMS when bridged to a 4 ohm load. Will have to use a pretty hefty single sub that is either 4 ohm SVC, or a 2+2 DVC. Not too many 4 ohm SVC's out there that can take that much power. The sub will cost much more than the amp when you are done... or use 2 DVC, (4+4) subs will works as well.
Swez
PS This amp will suck a lot of amperes from your electricals as it is a Class A/B amp. Do you know the fuse ratings used here?
Copyright ClubKnowledge 2009 * All Rights Reserved
