I just bought a 1989 Ford Bronco. But the guy that I bought it from clipped all the wires behind the stereo so now I got to figure out what wire colors are what. I've found the speakers but I cant find anything else. None of the install guys I've called will help me out. If anyone knows I'd Be in your debt.
Replies (2)
swez on 03/6/2004 18:24:33
If you have too, make your own new harness for your HU. All you need is:
1. +12 volt off ACC/IGN fuse box (fuse this for radio power)
2. Ground wire to floor pan
3. Constant 12 volt source from BAT for memory & clock
4. The hard one is dimmer for light panel, (see what ttocs has for you on this one)
You have the speakers figured out already, so that should get you moving again. With a DC voltmeter or test lamp, you can probe for a constant 12 volt and dimmer functions.
Swez
ttocs on 03/7/2004 10:47:51
I should have the wire code in my omega books. Unfortunatly I am at work and will not be able to check till this evening. They are not always accurate, what are the colors that you have left over, and found already?
Replies (2)
swez on 03/6/2004 18:24:33
If you have too, make your own new harness for your HU. All you need is:
1. +12 volt off ACC/IGN fuse box (fuse this for radio power)
2. Ground wire to floor pan
3. Constant 12 volt source from BAT for memory & clock
4. The hard one is dimmer for light panel, (see what ttocs has for you on this one)
You have the speakers figured out already, so that should get you moving again. With a DC voltmeter or test lamp, you can probe for a constant 12 volt and dimmer functions.
Swez
ttocs on 03/7/2004 10:47:51
I should have the wire code in my omega books. Unfortunatly I am at work and will not be able to check till this evening. They are not always accurate, what are the colors that you have left over, and found already?
Copyright ClubKnowledge 2009 * All Rights Reserved
