I want to tap into the preamp signal coming into my factory BOSE amp so that I can get a good signal for a new sub amp. Does anyone have the wiring color codes for the lines between the head unit and the amp? I'm looking for LR and RR...2000 Pontiac Bonneville.
thx//
Replies (3)
swez on 02/28/2004 11:59:03
There is a Line out convertor you can buy for Bose systems that will do all this for you. It also converts high voltage to RCA level signals to give best signal/noise rejection.
I have seen this product off the web and designed by some of the sharpest engineers in car audio. Have a look at this:
http://www.davidnavone.com/detail.asp?PRODUCT_ID=N-85V
Swez
Auburn on 02/28/2004 16:03:11
Many thanks. I didn't know that an adpater existed.
swez on 02/28/2004 19:24:12
Neither did I until doing some research one late night.... great products too!
Swez
thx//
Replies (3)
swez on 02/28/2004 11:59:03
There is a Line out convertor you can buy for Bose systems that will do all this for you. It also converts high voltage to RCA level signals to give best signal/noise rejection.
I have seen this product off the web and designed by some of the sharpest engineers in car audio. Have a look at this:
http://www.davidnavone.com/detail.asp?PRODUCT_ID=N-85V
Swez
Auburn on 02/28/2004 16:03:11
Many thanks. I didn't know that an adpater existed.
swez on 02/28/2004 19:24:12
Neither did I until doing some research one late night.... great products too!
Swez
Copyright ClubKnowledge 2009 * All Rights Reserved
