|
Prev :: Next
MA120D6 12" Subwoofer 400W Rms 800W Max Dual 6-Ohm Voice Coils 180oz. Double Stacked Magnets Mounting Depth: 6.1” Mounting Diameter: 11.2” Optimum Vented Box: 2 Cu/Ft Round Port Diameter: (3) 3” Square Port Area: 21 Sq/In Port Length: 14” Optimum Sealed Box: 0.75 – 1 Cu/Ft $94.99 each http://maaudio.com/productcatalog.cfm?class=618 I plan to put two of these systems togather. Both will be using Dual Sealed Boxes. I was thinking the Raptor boxes off www.ikesound.com the only thing I worry about is the price for shipping because they charge a TON for that! 1990 Chevy Lumina 4 door 1992 Volvo 940 4door I was suprised when I saw that Crunch is a higer end cheaper amplifer. I thought it was just a knock off like Pyle, Legancy, ect... but I have heard some good things about this amp. Definatly no JBL but a decent choice for the lower cost effective amps? Crunch V-2800 Amplifier 2 x 350 Watts 4 Ohms 2 x 500 Watts @ 2 Ohms 1 x 1000 Watts @ 4 Ohm on sale $179.99 I think that it's most likely those specs at 14.4V These subs are Dual Voice Coil 6ohm subs how do I wire that up to the amp you guys think? Replies (2) SUBTROY1 on 02/4/2004 00:05:58 I've heard good stuff about the Crunch V amps myself. Troy carbudgetaudio.com cplkittle on 02/4/2004 09:17:44 I would wire each in parallel to get 3 from each sub, then in parallel again to get 1.5. Now, when they say 6ohm subs, most of the time you are getting 5.3 or something like that. I know 4ohm subs test out at 3.2-3.4, so really you are getting around .75-1ohm. Copyright ClubKnowledge 2009 * All Rights Reserved |