Will this amp work??

by triumph1902
  Prev :: Next
I'm looking into getting the Viper 500.4 to run my mids and highs. I know its a dei product but I'm not sure on the quality. The front speakers will most likely be CDT 61 not sure for the rears yet. So my question is will the Viper 500.6 which is 75x4 at 4ohm be a clean good quality amp?


Replies (2)
triumph1902 on 12/26/2003 12:37:27
Make that Viper 500.4 not 500.6!!

compvr15s on 12/26/2003 14:48:45
that will power a set of comps nicely, will bring them to life. as for rears may just want to get a set of 3way 6x9s, dont have to be anythings special since them cdts will be upfront, and how often will you be in the back seat listening to your system. i wouldnt get a really cheap set but dont go out and spend 200 on 6x9s like i did, they wont sound half as good as your seperats upfront. that amp would be a good choice as long as its 75x4 rms and not max, cuz then your only gettin bout 37.5 to your speaks when your cd player will put out about 22watts, wont notice the difference, but with the 75watts compared to the 22, will gain probably 6db, with is quite a bit. good luck




Prev :: Next
Copyright ClubKnowledge 2009 * All Rights Reserved

Valid HTML 4.01 Transitional